John Deere 2010 2520

Manufacturer		John Deere

Model Year		2010

Model		2520

MSRP		Request a Quote

MEASUREMENTS
Weight		1,865 lbs. (846 kg)

Wheelbase		65.2 in. (1,655 mm)

Turning Radius		With Brakes: 7.5 ft. (2.3 m) Without Brakes: 8.2 ft. (2.5 m)

Ground Clearance		Front Axle: 12.5 in. (318.4 mm)

ENGINE
Engine Make		Yanmar

Engine Model		3TNV82A

Engine Type		Direct injection

Gross Horsepower		26.4 hp (19.4 kW)

Bore x Stroke		3.23 x 3.31 in. (82 x 84 mm)

Cylinders		3 Liners: Cast-in-block

Torque		51.3 ft. lbs. (69.6 Nm) @ 2,600 rpm

Aspiration		Natural

Cooling		Water pump

Fuel Type		Diesel

Fuel Tank Capacity		7.1 gal. (27 l)

Lubrication		Pressurized

Air Cleaner		Dry-type, 2-stage

DRIVETRAIN
Transmission Type		Hydrostatic, 2-range

Drive Type		Final: Spur gear

Tire Size		Front: 23x8.5-12 R4 Rear: 36x14.00-17.5 R4

Axles		Flanged

Brakes		Wet disc

Steering		Power

ELECTRICAL
Electrical System		12V

Starting System		1.6 hp (1.2 kW)

Alternator		40A

Battery		500 CCA

HYDRAULICS
Hydraulic System		Open center

Pump Type		Gear

Standard Pump Flow		10.5 gpm (39.6 l/min.) Steering: 5.5 gpm (20.8 l/min.) Implement: 5 gpm (18.8 l/min.)

BODY
Rollover Protection (ROPS)		Foldable

OPERATIONAL
Lift Capacity		1,250 lbs. (567 kg) At Link Ends: 1,433 lbs. (650 kg)

Power Take-Off		Rear @ 540 rpm Mid @ 2,100 rpm

Hitch Category		Cat. I

Front Axle Capacity		1,940 lbs. (880 kg)

Rear Axle Capacity		2,426 lbs. (1,100 kg)